压裂斜井时射孔处雁形裂缝产生及干扰分析

在已射孔的斜井压裂过程中，射孔孔眼处会出现一系列的几乎相互平行的雁形裂缝。这些裂缝的延伸、连接受到地层应力及裂缝本身的影响，情况较为复杂，但它们的延伸和连接对压裂的成功与否至关重要。笔者对裂缝模型进行简化，将复变函数理论与位错理论相结合，并且考虑了裂缝表面有流体压力作用且裂缝之间存在相互干扰的情况下，建立了无限大介质中裂尖应力强度因子的数学模型，利用该模型可对雁型裂缝之间的相互干扰进行力学分析。应用数值方法对所建立的数学模型求解，得到裂尖的应力强度因子及转角，来预测裂缝连接情况。该结果可用来指导压裂井的射孔施工。     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

电磁铸造液柱高度数学模型的建立及应用

为了研究熔体金属电磁立柱成形能力并计算电磁作用下的液注高度,从电磁铸造立柱成形的基本原理出发,建立了电磁场作用下金属立柱成形时液柱高度数学模型,并试验验证了模型的准确性.利用液柱高度数学模型对铝、钢、锡铅合金等金属的电磁铸造可行性,以及电力参数对液柱高度的影响进行研究.结果表明:铝电磁无模成形能力最强,而钢及锡铅合金电磁无模成形能力则基本相同;钢及锡铅合金电磁立柱成形所需的磁感强度约为0.08～0.10 T,而铝则只需约0.04T.     

高能超声处理对锡锑包晶合金凝固组织的影响

在锡锑包晶合金的凝固过程中导入高能超声，不仅显著细化α相和β相晶粒组织，同时使具有立方晶体特征的β相组织有明显的球化趋势，消除了密度偏析，分析了高能超声细化凝固组织的机理。     

On integral equation approaches to the mechanics of fibre-crack interaction

The paper examines the problem of a penny-shaped crack which is formed by the development of a crack in both the fibre and the matrix of a composite consisting of an isolated elastic fibre located in an elastic matrix of infinite extent. The composite region is subjected to a uniform strain field in the direction of the fibre. The paper presents two integral-equation based approaches for the analysis of the problem. The first approach considers the formulation of the complete integral equations governing the associated elasticity problem for a two material region. The second approach considers the boundary integral equation formulation of the problem. Both methods entail the numerical solution of the governing integral equations. The solutions to these integral equations are used to evaluate the stress intensity factor at the boundary of the penny-shaped crack.     

基于状态空间法的加密器设计研究

本文基于控制理论中的状态空间方法,提出了一种设计加密器和解密器的方法.加密器没计为—个非线性能观系统,这种加密器在同等的安全强度情况下,较之传统的移位寄存器式加密器没计容易,计算复杂度低,加解密速度快,结构灵活,易于实现.本文还讨论了提高这种加密器性能的基本途径,并举了几个说明性例子说明这种加密器及其设计方法的可行性.     

90°分束偏光镜光强分束比研究

给出了90°分束偏光镜的e,o光光强分束比的计算公式,以及光强分束比随光波长的变化曲线;在6328Å测得的光强分束比与计算值是一致的。     

HDPE/CB-GP复合材料体系电性质的研究

当HDPE含量46％（质量分数，以下同）、其它添加剂（如抗氧剂、阻燃剂、交联剂和润滑剂等辅助填料）的含量11％，两种导电填料石墨（GP）和碳黑（CB）的总含量为43％时，研究结果表明石墨含量的变化对HDPE/CB-GP复合材料室温电阻率、阴C强度和后NTC强度有显著的影响．HDPE/CB-GP复合材料中GP的含量〈8．6％时，样品的室温电阻率〈30Ω·m，PTC强度〉7、后NTC强度〈1．3；电阻率．温度曲线经过17次冷热循环后重现性好，复合材料具有实际应用价值；GP在复合材料中为层片状结构。